ansible: Fehler beim Verbinden mit dem Host via ssh: Warnung: Permanent '10.90.0.2 '(ECDSA) zur Liste der bekannten Hosts hinzugefügt. \ R \ nPermission denied

Question

Ich möchte den Schlüssel einige Hosts, aber einige Login verwenden err geschah

meine Dateien ist dies unter:

[jenkins@ci-jenkins-slave-dev test]$ ls 
ansible.cfg hosts test.yml 

meine hosts-Datei:

[jenkins@ci-jenkins-slave-dev test]$ cat hosts 
[controller] 
10.90.0.2 ssh_key_pass=passw0rd ansible_ssh_user=root 

mein Textbuch:

[jenkins@ci-jenkins-slave-dev test]$ cat test.yml 
--- 

- name: test 
    hosts: controller 
    tasks: 
    - name: add key 
     authorized_key: 
     user: root 
     key: "{{ lookup('file', '~/.ssh/id_rsa.pub') }}" 

bei der Ausführung Textbuch:

[jenkins@ci-jenkins-slave-dev test]$ ansible-playbook test.yml 

PLAY [test] ****************************************************************************************************************************************************************************************************************************************************************** 

TASK [add key] *************************************************************************************************************************************************************************************************************************************************************** 
fatal: [10.90.0.2]: UNREACHABLE! => {"changed": false, "msg": "Failed to connect to the host via ssh: Warning: Permanently added '10.90.0.2' (ECDSA) to the list of known hosts.\r\nPermission denied (publickey,password).\r\n", "unreachable": true} 
    to retry, use: --limit @/home/jenkins/ansible-test/test/test.retry 

PLAY RECAP ******************************************************************************************************************************************************************************************************************************************************************* 
10.90.0.2     : ok=0 changed=0 unreachable=1 failed=0 

kann ich „ssh root@10.90.0.2“ und Eingang ‚passw0rd‘ verwenden, um einzuloggen, aber ansible kann nicht, ich will wissen, was los ist

mein ansible.cfg:

[jenkins@ci-jenkins-slave-dev test]$ cat ansible.cfg 
# config file for ansible -- http://ansible.com/ 
# ============================================== 

# nearly all parameters can be overridden in ansible-playbook 
# or with command line flags. ansible will read ANSIBLE_CONFIG, 
# ansible.cfg in the current working directory, .ansible.cfg in 
# the home directory or /etc/ansible/ansible.cfg, whichever it 
# finds first 

[defaults] 

# some basic default values... 

hostfile  = ./hosts 
library  = /usr/share/ansible 
remote_tmp  = $HOME/.ansible/tmp 
pattern  = * 
forks   = 5 
poll_interval = 15 
sudo_user  = root 
#ask_sudo_pass = True 
#ask_pass  = True 
transport  = smart 
remote_port = 22 
module_lang = C 

# plays will gather facts by default, which contain information about 
# the remote system. 
# 
# smart - gather by default, but don't regather if already gathered 
# implicit - gather by default, turn off with gather_facts: False 
# explicit - do not gather by default, must say gather_facts: True 
gathering = explicit 

# additional paths to search for roles in, colon separated 
#roles_path = /etc/ansible/roles 

# uncomment this to disable SSH key host checking 
host_key_checking = False 

# change this for alternative sudo implementations 
sudo_exe = sudo 

# what flags to pass to sudo 
#sudo_flags = -H 

# SSH timeout 
timeout = 10 

# default user to use for playbooks if user is not specified 
# (/usr/bin/ansible will use current user as default) 
remote_user = root 

# logging is off by default unless this path is defined 
# if so defined, consider logrotate 
#log_path = /var/log/ansible.log 

# default module name for /usr/bin/ansible 
#module_name = command 

# use this shell for commands executed under sudo 
# you may need to change this to bin/bash in rare instances 
# if sudo is constrained 
#executable = /bin/sh 

# if inventory variables overlap, does the higher precedence one win 
# or are hash values merged together? The default is 'replace' but 
# this can also be set to 'merge'. 
#hash_behaviour = replace 

# list any Jinja2 extensions to enable here: 
#jinja2_extensions = jinja2.ext.do,jinja2.ext.i18n 

# if set, always use this private key file for authentication, same as 
# if passing --private-key to ansible or ansible-playbook 
private_key_file = ~/.ssh/id_rsa 

# format of string {{ ansible_managed }} available within Jinja2 
# templates indicates to users editing templates files will be replaced. 
# replacing {file}, {host} and {uid} and strftime codes with proper values. 
ansible_managed = Ansible managed: {file} modified on %Y-%m-%d %H:%M:%S by {uid} on {host} 

# by default, ansible-playbook will display "Skipping [host]" if it determines a task 
# should not be run on a host. Set this to "False" if you don't want to see these "Skipping" 
# messages. NOTE: the task header will still be shown regardless of whether or not the 
# task is skipped. 
#display_skipped_hosts = True 

# by default (as of 1.3), Ansible will raise errors when attempting to dereference 
# Jinja2 variables that are not set in templates or action lines. Uncomment this line 
# to revert the behavior to pre-1.3. 
#error_on_undefined_vars = False 

# by default (as of 1.6), Ansible may display warnings based on the configuration of the 
# system running ansible itself. This may include warnings about 3rd party packages or 
# other conditions that should be resolved if possible. 
# to disable these warnings, set the following value to False: 
#system_warnings = True 

# by default (as of 1.4), Ansible may display deprecation warnings for language 
# features that should no longer be used and will be removed in future versions. 
# to disable these warnings, set the following value to False: 
#deprecation_warnings = True 

# set plugin path directories here, separate with colons 
action_plugins  = /usr/share/ansible_plugins/action_plugins 
callback_plugins = /usr/share/ansible_plugins/callback_plugins 
connection_plugins = /usr/share/ansible_plugins/connection_plugins 
lookup_plugins  = /usr/share/ansible_plugins/lookup_plugins 
vars_plugins  = /usr/share/ansible_plugins/vars_plugins 
filter_plugins  = /usr/share/ansible_plugins/filter_plugins 

# don't like cows? that's unfortunate. 
# set to 1 if you don't want cowsay support or export ANSIBLE_NOCOWS=1 
#nocows = 1 

# don't like colors either? 
# set to 1 if you don't want colors, or export ANSIBLE_NOCOLOR=1 
#nocolor = 1 

# the CA certificate path used for validating SSL certs. This path 
# should exist on the controlling node, not the target nodes 
# common locations: 
# RHEL/CentOS: /etc/pki/tls/certs/ca-bundle.crt 
# Fedora  : /etc/pki/ca-trust/extracted/pem/tls-ca-bundle.pem 
# Ubuntu  : /usr/share/ca-certificates/cacert.org/cacert.org.crt 
#ca_file_path = 

# the http user-agent string to use when fetching urls. Some web server 
# operators block the default urllib user agent as it is frequently used 
# by malicious attacks/scripts, so we set it to something unique to 
# avoid issues. 
#http_user_agent = ansible-agent 

[paramiko_connection] 

# uncomment this line to cause the paramiko connection plugin to not record new host 
# keys encountered. Increases performance on new host additions. Setting works independently of the 
# host key checking setting above. 
record_host_keys=False 

# by default, Ansible requests a pseudo-terminal for commands executed under sudo. Uncomment this 
# line to disable this behaviour. 
#pty=False 

[ssh_connection] 

# ssh arguments to use 
# Leaving off ControlPersist will result in poor performance, so use 
# paramiko on older platforms rather than removing it 
ssh_args = -o ControlMaster=auto -o ControlPersist=60s -o UserKnownHostsFile=/dev/null 

# The path to use for the ControlPath sockets. This defaults to 
# "%(directory)s/ansible-ssh-%%h-%%p-%%r", however on some systems with 
# very long hostnames or very long path names (caused by long user names or 
# deeply nested home directories) this can exceed the character limit on 
# file socket names (108 characters for most platforms). In that case, you 
# may wish to shorten the string below. 
# 
# Example: 
# control_path = %(directory)s/%%h-%%r 
#control_path = %(directory)s/ansible-ssh-%%h-%%p-%%r 

# Enabling pipelining reduces the number of SSH operations required to 
# execute a module on the remote server. This can result in a significant 
# performance improvement when enabled, however when using "sudo:" you must 
# first disable 'requiretty' in /etc/sudoers 
# 
# By default, this option is disabled to preserve compatibility with 
# sudoers configurations that have requiretty (the default on many distros). 
# 
#pipelining = False 

# if True, make ansible use scp if the connection type is ssh 
# (default is sftp) 
#scp_if_ssh = True 

[accelerate] 
accelerate_port = 5099 
accelerate_timeout = 30 
accelerate_connect_timeout = 5.0 

# The daemon timeout is measured in minutes. This time is measured 
# from the last activity to the accelerate daemon. 
accelerate_daemon_timeout = 30 

# If set to yes, accelerate_multi_key will allow multiple 
# private keys to be uploaded to it, though each user must 
# have access to the system via SSH to add a new key. The default 
# is "no". 
#accelerate_multi_key = yes 

Wenn Sie weitere Informationen benötigen, lassen Sie es mich wissen, und ich will hinzufügen

Answer 1

Die Variable für das Passwort ist ansible_ssh_pass, aber Sie verwenden ssh_key_pass.

Versuchen mit diesem Inventar:

[controller] 
10.90.0.2 ansible_ssh_pass=passw0rd ansible_ssh_user=root