Android Things Developer Preview 4: flash-all.sh auf MacOSX fehlgeschlagen

Question

ich das BIOS von Linux im Anschluss an diesen Anweisungen aktualisiert: https://software.intel.com/en-us/articles/installing-android-things-on-intel-edison-kit-for-arduino

und kam dann zurück zu meinem Mac OS X 10.12.5 und versuchte Flash-all zu laufen .sh

$ uname -a 
Darwin ag.intel.com 16.6.0 Darwin Kernel Version 16.6.0: Fri Apr 14 16:21:16 PDT 2017; root:xnu-3789.60.24~6/RELEASE_X86_64 x86_64 
$ ./flash-all.sh 
target reported max download size of 117440512 bytes 
sending 'gpt' (33 KB)... 
OKAY [ 0.008s] 
writing 'gpt'... 
OKAY [ 0.149s] 
sending 'u-boot' (375 KB)... 
OKAY [ 0.020s] 
writing 'u-boot'... 
OKAY [ 0.104s] 
erasing 'misc'... 
OKAY [ 0.132s] 
rebooting into bootloader... 
OKAY [ 0.001s] 
finished. total time: 0.415s 
ERROR: could not clear input pipe; result e00002ed, ignoring... 
ERROR: could not clear output pipe; result e00002d8, ignoring.... 
ERROR: usb_write failed with status e0004061 
ERROR: usb_write failed with status e00002d9 
ERROR: usb_write failed with status e00002d9 
ERROR: usb_write failed with status e00002d9 
ERROR: usb_write failed with status e00002c0 
ERROR: usb_write failed with status e00002c0 
target didn't report max-download-size 
ERROR: usb_write failed with status e00002c0 
ERROR: usb_write failed with status e00002c0 
ERROR: usb_write failed with status e00002c0 
ERROR: usb_write failed with status e00002c0 
ERROR: usb_write failed with status e00002c0 
ERROR: usb_write failed with status e00002c0 
ERROR: usb_write failed with status e00002c0 
ERROR: usb_write failed with status e00002c0 
ERROR: usb_write failed with status e00002c0 
FAILED (command write failed (Invalid argument)) 
ERROR: usb_write failed with status e00002c0 
ERROR: usb_write failed with status e00002c0 
ERROR: usb_write failed with status e00002c0 
ERROR: usb_write failed with status e00002c0 
error: Device does not support slots. 

Answer 1

Dies ist ein Regressions Fehler in der Flash-all Skript für Edison, der in der nächsten Preview-Version behoben werden. Sie können das Problem in der Zwischenzeit beheben, indem Sie die folgende Änderung zu flash-all.sh machen:

# Due to possible changes in the u-boot version, we might have some 
# issues flashing gpt or recognizing the _a/_b partitions. 
# Just to be safe, flash and reboot to the updated version 
fastboot \ 
    flash gpt  "${OS}"/partition-table.img \ 
    flash u-boot  "${VENDOR}"/u-boot-edison.bin \ 
    erase misc \ 
    reboot bootloader \ 
    "$@" 
sleep 5 <----- Add this line 

Dies wird das Skript zulassen ordnungsgemäß nach dem ersten Neustart während des Blinkens Prozess fortzusetzen.