aktualisieren Ich brauche Änderungen nach dem Modul zu aktualisieren.Wie Opencart Änderung durch Code
public function install() {
$this->load->controller('marketplace/modification/refresh');
}
Ich habe das versucht. Es funktionierte, aber die Seite wurde zum Modifikationsverzeichnis umgeleitet. Wie kann ich ohne Redirect auskommen? Ich bin mit OpenCart 3.
Wenn Sie nicht modification.php bearbeiten möchten oder seine refresh Funktion klonen, können Sie diese verwenden:
public function install(){
$data['redirect'] = 'extension/extension/module';
$this->load->controller('marketplace/modification/refresh', $data);
}
Sie nicht auf diese Weise kontrollieren könnten, wie Sie tun:
Sie müssen dies tun, als
public function install() {
$this->refresh();
}
protected function refresh($data = array()) {
$this->load->language('marketplace/modification');
$this->document->setTitle($this->language->get('heading_title'));
$this->load->model('setting/modification');
if ($this->validate()) {
// Just before files are deleted, if config settings say maintenance mode is off then turn it on
$maintenance = $this->config->get('config_maintenance');
$this->load->model('setting/setting');
$this->model_setting_setting->editSettingValue('config', 'config_maintenance', true);
//Log
$log = array();
// Clear all modification files
$files = array();
// Make path into an array
$path = array(DIR_MODIFICATION . '*');
// While the path array is still populated keep looping through
while (count($path) != 0) {
$next = array_shift($path);
foreach (glob($next) as $file) {
// If directory add to path array
if (is_dir($file)) {
$path[] = $file . '/*';
}
// Add the file to the files to be deleted array
$files[] = $file;
}
}
// Reverse sort the file array
rsort($files);
// Clear all modification files
foreach ($files as $file) {
if ($file != DIR_MODIFICATION . 'index.html') {
// If file just delete
if (is_file($file)) {
unlink($file);
// If directory use the remove directory function
} elseif (is_dir($file)) {
rmdir($file);
}
}
}
// Begin
$xml = array();
// Load the default modification XML
$xml[] = file_get_contents(DIR_SYSTEM . 'modification.xml');
// This is purly for developers so they can run mods directly and have them run without upload after each change.
$files = glob(DIR_SYSTEM . '*.ocmod.xml');
if ($files) {
foreach ($files as $file) {
$xml[] = file_get_contents($file);
}
}
// Get the default modification file
$results = $this->model_setting_modification->getModifications();
foreach ($results as $result) {
if ($result['status']) {
$xml[] = $result['xml'];
}
}
$modification = array();
foreach ($xml as $xml) {
if (empty($xml)){
continue;
}
$dom = new DOMDocument('1.0', 'UTF-8');
$dom->preserveWhiteSpace = false;
$dom->loadXml($xml);
// Log
$log[] = 'MOD: ' . $dom->getElementsByTagName('name')->item(0)->textContent;
// Wipe the past modification store in the backup array
$recovery = array();
// Set the a recovery of the modification code in case we need to use it if an abort attribute is used.
if (isset($modification)) {
$recovery = $modification;
}
$files = $dom->getElementsByTagName('modification')->item(0)->getElementsByTagName('file');
foreach ($files as $file) {
$operations = $file->getElementsByTagName('operation');
$files = explode('|', $file->getAttribute('path'));
foreach ($files as $file) {
$path = '';
// Get the full path of the files that are going to be used for modification
if ((substr($file, 0, 7) == 'catalog')) {
$path = DIR_CATALOG . substr($file, 8);
}
if ((substr($file, 0, 5) == 'admin')) {
$path = DIR_APPLICATION . substr($file, 6);
}
if ((substr($file, 0, 6) == 'system')) {
$path = DIR_SYSTEM . substr($file, 7);
}
if ($path) {
$files = glob($path, GLOB_BRACE);
if ($files) {
foreach ($files as $file) {
// Get the key to be used for the modification cache filename.
if (substr($file, 0, strlen(DIR_CATALOG)) == DIR_CATALOG) {
$key = 'catalog/' . substr($file, strlen(DIR_CATALOG));
}
if (substr($file, 0, strlen(DIR_APPLICATION)) == DIR_APPLICATION) {
$key = 'admin/' . substr($file, strlen(DIR_APPLICATION));
}
if (substr($file, 0, strlen(DIR_SYSTEM)) == DIR_SYSTEM) {
$key = 'system/' . substr($file, strlen(DIR_SYSTEM));
}
// If file contents is not already in the modification array we need to load it.
if (!isset($modification[$key])) {
$content = file_get_contents($file);
$modification[$key] = preg_replace('~\r?\n~', "\n", $content);
$original[$key] = preg_replace('~\r?\n~', "\n", $content);
// Log
$log[] = PHP_EOL . 'FILE: ' . $key;
}
foreach ($operations as $operation) {
$error = $operation->getAttribute('error');
// Ignoreif
$ignoreif = $operation->getElementsByTagName('ignoreif')->item(0);
if ($ignoreif) {
if ($ignoreif->getAttribute('regex') != 'true') {
if (strpos($modification[$key], $ignoreif->textContent) !== false) {
continue;
}
} else {
if (preg_match($ignoreif->textContent, $modification[$key])) {
continue;
}
}
}
$status = false;
// Search and replace
if ($operation->getElementsByTagName('search')->item(0)->getAttribute('regex') != 'true') {
// Search
$search = $operation->getElementsByTagName('search')->item(0)->textContent;
$trim = $operation->getElementsByTagName('search')->item(0)->getAttribute('trim');
$index = $operation->getElementsByTagName('search')->item(0)->getAttribute('index');
// Trim line if no trim attribute is set or is set to true.
if (!$trim || $trim == 'true') {
$search = trim($search);
}
// Add
$add = $operation->getElementsByTagName('add')->item(0)->textContent;
$trim = $operation->getElementsByTagName('add')->item(0)->getAttribute('trim');
$position = $operation->getElementsByTagName('add')->item(0)->getAttribute('position');
$offset = $operation->getElementsByTagName('add')->item(0)->getAttribute('offset');
if ($offset == '') {
$offset = 0;
}
// Trim line if is set to true.
if ($trim == 'true') {
$add = trim($add);
}
// Log
$log[] = 'CODE: ' . $search;
// Check if using indexes
if ($index !== '') {
$indexes = explode(',', $index);
} else {
$indexes = array();
}
// Get all the matches
$i = 0;
$lines = explode("\n", $modification[$key]);
for ($line_id = 0; $line_id < count($lines); $line_id++) {
$line = $lines[$line_id];
// Status
$match = false;
// Check to see if the line matches the search code.
if (stripos($line, $search) !== false) {
// If indexes are not used then just set the found status to true.
if (!$indexes) {
$match = true;
} elseif (in_array($i, $indexes)) {
$match = true;
}
$i++;
}
// Now for replacing or adding to the matched elements
if ($match) {
switch ($position) {
default:
case 'replace':
$new_lines = explode("\n", $add);
if ($offset < 0) {
array_splice($lines, $line_id + $offset, abs($offset) + 1, array(str_replace($search, $add, $line)));
$line_id -= $offset;
} else {
array_splice($lines, $line_id, $offset + 1, array(str_replace($search, $add, $line)));
}
break;
case 'before':
$new_lines = explode("\n", $add);
array_splice($lines, $line_id - $offset, 0, $new_lines);
$line_id += count($new_lines);
break;
case 'after':
$new_lines = explode("\n", $add);
array_splice($lines, ($line_id + 1) + $offset, 0, $new_lines);
$line_id += count($new_lines);
break;
}
// Log
$log[] = 'LINE: ' . $line_id;
$status = true;
}
}
$modification[$key] = implode("\n", $lines);
} else {
$search = trim($operation->getElementsByTagName('search')->item(0)->textContent);
$limit = $operation->getElementsByTagName('search')->item(0)->getAttribute('limit');
$replace = trim($operation->getElementsByTagName('add')->item(0)->textContent);
// Limit
if (!$limit) {
$limit = -1;
}
// Log
$match = array();
preg_match_all($search, $modification[$key], $match, PREG_OFFSET_CAPTURE);
// Remove part of the the result if a limit is set.
if ($limit > 0) {
$match[0] = array_slice($match[0], 0, $limit);
}
if ($match[0]) {
$log[] = 'REGEX: ' . $search;
for ($i = 0; $i < count($match[0]); $i++) {
$log[] = 'LINE: ' . (substr_count(substr($modification[$key], 0, $match[0][$i][1]), "\n") + 1);
}
$status = true;
}
// Make the modification
$modification[$key] = preg_replace($search, $replace, $modification[$key], $limit);
}
if (!$status) {
// Abort applying this modification completely.
if ($error == 'abort') {
$modification = $recovery;
// Log
$log[] = 'NOT FOUND - ABORTING!';
break 5;
}
// Skip current operation or break
elseif ($error == 'skip') {
// Log
$log[] = 'NOT FOUND - OPERATION SKIPPED!';
continue;
}
// Break current operations
else {
// Log
$log[] = 'NOT FOUND - OPERATIONS ABORTED!';
break;
}
}
}
}
}
}
}
}
// Log
$log[] = '----------------------------------------------------------------';
}
// Log
$ocmod = new Log('ocmod.log');
$ocmod->write(implode("\n", $log));
// Write all modification files
foreach ($modification as $key => $value) {
// Only create a file if there are changes
if ($original[$key] != $value) {
$path = '';
$directories = explode('/', dirname($key));
foreach ($directories as $directory) {
$path = $path . '/' . $directory;
if (!is_dir(DIR_MODIFICATION . $path)) {
@mkdir(DIR_MODIFICATION . $path, 0777);
}
}
$handle = fopen(DIR_MODIFICATION . $key, 'w');
fwrite($handle, $value);
fclose($handle);
}
}
// Maintance mode back to original settings
$this->model_setting_setting->editSettingValue('config', 'config_maintenance', $maintenance);
// Do not return success message if refresh() was called with $data
$this->session->data['success'] = $this->language->get('text_success');
$url = '';
if (isset($this->request->get['sort'])) {
$url .= '&sort=' . $this->request->get['sort'];
}
if (isset($this->request->get['order'])) {
$url .= '&order=' . $this->request->get['order'];
}
if (isset($this->request->get['page'])) {
$url .= '&page=' . $this->request->get['page'];
}
}
}
Ich hoffe, es shouwl für Sie arbeiten. Dieser Prozess wird verwendet, um die Änderung bei der Installation Ihres Moduls zu aktualisieren.
Wenn Sie global dies benötigen, dann sagen Sie mir bitte ich werde Sie aktualisieren.